MonoLED Range

Product Description

Where particular locations and hazards need emergency illumination, BS5266 Part 10 sets out levels of illuminance that must be achieved. To meet these, P4‘s high intensity single LED can provide the required illuminance. MonoLED can either be recessed or surface mounted, using a single 3W white LED enclosed behind a polycarbonate cover. This is either white for general installation, red to highlight fire equipment or green for first aid/accessibility equipment.

Product DetailsValue
FASTEL Stand AloneMONO/RC/S/M3/WH Recessed mount
MONO/SC/S/M3/WH Surface mount
MONO/CC/S/M3/WH Conduit surface mount
MONO4/RC/S/M3/WH Recessed mount 4 cell
MONO4/SC/S/M3/WH Surface mount 4 cell
MONO4/CC/S/M3/WH Conduit surface mount 4 cell
FASTELink M-webMONO/RC/SRM/M3/WH Recessed mount
MONO/SC/SRM/M3/WH Surface mount
MONO/CC/SRM/M3/WH Conduit surface mount
MONO4/RC/SRM/M3/WH Recessed mount 4 cell
MONO4/SC/SRM/M3/WH Surface mount 4 cell
MONO4/CC/SRM/M3/WH Conduit surface mount 4 cell
FASTEL SRMMONO/RC/SRM/M3/WH Recessed mount
MONO/SC/SRM/M3/WH Surface mount
MONO/CC/SRM/M3/WH Conduit surface mount
MONO4/RC/SRM/M3/WH Recessed mount 4 cell
MONO4/SC/SRM/M3/WH Surface mount 4 cell
MONO4/CC/SRM/M3/WH Conduit surface mount 4 cell
FASTEL WirelessMONO/RC/FWS/M3/WH Recessed mount
MONO/SC/FWS/M3/WH Surface mount
MONO/CC/FWS/M3/WH Conduit surface mount
Alternative Voltage OptionsMONO/RC/230/WH Recessed mount (230V Mains or Static Inverter)
MONO/SC/230/WH Surface mount (230V Mains or Static Inverter)
Product StandardBSEN 60598-2.22
ComplianceBSEN 60598-2.22
IP RatingIP20 or IP54 with optional clear polycarbonate cover: product code LCL
Lamp Type/Light Source1 X 1 Watt high intensity white LED
DimensionsView Dimensions
Suitable LocationsHazardous areas and high importance emphasis points such as fire equipment
Max Viewing DistanceN/A
Spacing DataView Spacing Data
MountingCeiling
Surface or RecessedRecessed or Surface
Colour OptionsWhite for general installations. /R: Red for fire equipment or /G: Green for first aid/accessibility equipment
DiffuserN/A
Photocell CompatibleNo
Legend PanelN/A
Anti-Ligature OptionNo
Input230V ± 10% 50/60Hz
Audible WarningYes
Mode/DurationMaintained, 3 hours. (Optional non maintained operation.)
Battery Recharge PeriodsFull Duration – 24 hours. Full Capacity – 48 hours.
Weight480gm
MaterialPolycarbonate
Cut Out Size104mm diameter
Cableset CompatibleYes
Fitting Instructions650-1122-iss1-quatrum-recessed-instructions

650-1522-iss-2-quatrum-surface-fitting-instructions-p4

650-1722-iss-1-quatrum-anti-ligature-instructions-p4

650-1322-iss-2-quatrum-ceiling-tile-protector-instructions-p4

660-003 Iss 1 Quatrum Range IP Rated Conduit Skirt Fitting Instructions – QuadLED

(Recessed*/ Surface*) mounted LED emergency lighting luminaire with high intensity white 1 Watt LEDs mounted in a RAL9016 white, low profile fascia plate with purpose designed lenses, suitable for (escape route*/ anti panic open area*/ specific hazard*) illumination. Class II insulated, all plastic housing of flame retardant ABS complying with 850° hot wire test.
Recessed mounted to be retained into 104mm dia. mounting hole in ceilings of 1mm to 24mm thickness by spring clips. Surface mounted, fixed to ceiling by zinc plated steel mounting plate with conduit and BESA box cable entries.
230V+10% a.c 50/60 Hz input.
Rechargeable NiCd Battery for three hours emergency duration and incorporates fully automatic self testing facility and status indication through a single multi function bi-colour LED indicator.
All emergency lighting versions to be (FASTEL stand alone*/FASTELink*/ FASTEL Wireless*)
As P4 Quatrum (insert code)
(*Delete as appropriate)